Ragnar Metals & Tubes

Inconel 625 is a non-magnetic, corrosion and oxidation resistant, nickel-chromium alloy. This material can be used because of its high strength, excellent uniform corrosion resistance, resistance to stress cracking and excellent pitting resistance in 500°-600°F (260-316°C) water.

nconel 625 Welded Pipes are a superalloy that has been solid solution strengthened for use in both elevated temperature and high pressured applications. The pipes produced under ASTM B444 UNS N06625 specification often indicates that these pipes have a seamless construction.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

INCONEL GR.600 Round Bar is used in various high-temperature and corrosive applications, including:
Power Generation1. Nuclear power plant components2. Fossil fuel power plant components3. Heat exchangers and condensers
Chemical Processing1. Equipment for handling corrosive chemicals2. Reactors and vessels3. Pumps, valves, and piping systems
Aerospace and Defense1. Aircraft engine components2. Gas turbine components3. Rocket components
Industrial Heating1. Furnace components2. Heat exchangers3. Heating elements

INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. Typical composition limits are shown in Table 1. The age-hardenable alloy can be readily fabricated, even into complex parts.

NCONEL® alloy 725 (UNS N07725) is a nickel- chromium-molybdenum-niobium alloy that is highly resistant to corrosion and is age hardenable for extreme

Nickel Chromium Alloy Angle and Channel are used in various applications, including:
Aerospace and Defense1. Jet engine components (e.g., turbine blades, vanes)2. Gas turbine components3. Rocket components
Power Generation1. Nuclear power plant components (e.g., reactor vessels, piping)2. Fossil fuel power plant components (e.g., boiler tubes, heat exchangers)3. Geothermal power plant components
Chemical Processing1. Chemical reactors and vessels2. Piping and tubing systems3. Heat exchangers and condensers
Oil and Gas1. Downhole components (e.g., tubing, casing)2. Wellhead and Christmas tree components3. Pipeline and piping systems
Automotive1. Exhaust system components (e.g., mufflers, catalytic converters)2. Engine components (e.g., piston rings, cylinder liners)

Hastelloy® c-276 is nickel-chromium-iron alloy with addition of molybdenum and copper. The alloy has excellent corrosion resistance to oxidizing chemicals and atmospheres while offering resistance to reducing chemical resulting from the nickel and copper content.

Monel 400® is a popular nickel-copper alloy often employed in high-performance applications. This alloy exhibits high resistance to acidic and alkaline environments, high strength, and good ductility and thermal conductivity.

The incoloy 825 is a high nickel alloy with chromium, molybdenum and titanium in it. So the material is strong. The 825 Incoloy Orifice Flange is corrosion resistant to reducing and oxidizing media so that it could be used in sea water as well as acid production applications.

Inconel 725 elbows are used in various high-temperature and corrosive applications, including:
Oil and Gas Industry1. Subsea applications: Wellhead equipment, pipelines, and flowlines.2. Downhole components: Drilling and production equipment.3. Refinery and petrochemical plant construction: Piping, heat exchangers, and reactors.
Power Generation1. Nuclear reactors: Fuel rods, control rods, and reactor vessels.2. Fossil fuel-fired power plants: Boilers, heat exchangers, and piping.
Chemical Processing1. Chemical reactors: Piping, heat exchangers, and reactor vessels.2. Petrochemical plant construction: Piping, heat exchangers, and reactors.
Aerospace and Defense1. Aerospace components: Engine components, turbine blades, and fasteners.2. Defense applications: Missile and rocket components.

Monel 404 elbows are used in various applications, including:
Chemical Processing and Pharmaceutical Industries1. Chemical reactors, heat exchangers, and piping systems2. Equipment for handling corrosive chemicals, such as sulfuric acid and hydrochloric acid
Marine and Offshore Industries1. Marine hardware, such as propeller shafts, fittings, and fasteners2. Offshore platform components, including piping, tubing, and heat exchangers
Aerospace and Defense1. Aerospace components, such as engine components, fasteners, and fittings2. Defense applications, including marine hardware and ordnance components
Power Generation and Desalination Plants1. Heat exchangers, condensers, and piping systems2. Components for flue gas desulfurization (FGD) systems
Other Applications1. Food processing equipment, such as heat exchangers, piping, and fittings2. Medical equipment, including surgical instruments and implantable devices

INCONEL GR.600 Hex Bar is used in various applications, including:<br />Nuclear Industry1. Nuclear power plant components2. Reactor vessels and internals<br />Chemical Processing1. Equipment for handling corrosive chemicals2. Heat exchangers and condensers3. Pumps, valves, and piping systems<br />Power Generation1. Fossil fuel power plant components2. Heat exchangers and condensers<br />Aerospace and Defense1. Aircraft engine components2. Gas turbine components<br />Industrial Heating1. Furnace components2. Heat exchangers3. Heating elements<br />Fasteners and Fixtures1. High-temperature bolts and nuts2. Corrosion-resistant fasteners