Ragnar Metals & Tubes

The pin is thereby between two semi-circular in cross-section radial grooves of the neck and the nut and then performs the holding function of the taper coupling. The sealing is achieved by the O-ring 24° - Taper couplings in the range of 24° -lnner cone the threaded connector (bore form W to DIN 3861).

A fitting or adapter is used in pipe systems to connect sections of pipe (designated by nominal size, with greater tolerances of variance) or tube (designated by actual size, with lower tolerance for variance), adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow

stainless steel elbow 304 seamless 8"nb sch 160. Pipe Elbow is a fitting that is used to change the direction of a pipe either by 45 degrees angle or by 90 degrees angle by default.

Stainless Steel 304 Pipe is a metallic pipe made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. Navstar Steel is a leading supplier and manufacturer of the Stainless Steel 304 Pipe in different types and sizes

Titanium Grade 5 is the most commercially available of all titanium alloys. It offers an excellent combination of high strength and toughness. Grade 5 titanium has good welding and fabrication characteristics. We stock and sell Titanium Grade 5 in bar, forgings, plates, sheets, welding wire & wire in this grade.

Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Type 304 stainless steel is an austenitic grade that can be severely deep drawn.

Aluminum Pipe 6063 is a tubular shaped pipe of 6063 aluminum alloy. This grade is commonly referred to as the architectural alloy. 6063 Aluminum Alloy was developed as an extrusion alloy with relatively high tensile properties, excellent finish characteristics and high corrosion resistance.

Alloy 1060 is a relatively low strength, high purity alloy with a 99.6% minimum aluminum content. It is noted for its excellent welding characteristics and formability along with good corrosion resistance.

Stainless Steel Angle Channel 304 is used in various applications, including:<br />Food and Beverage Industry1. Food processing equipment (e.g., tanks, piping, heat exchangers)2. Brewery and winery equipment3. Dairy equipment<br />Chemical Processing1. Chemical reactors and vessels2. Piping and tubing systems3. Heat exchangers and condensers<br />Architectural and Construction1. Handrails and railings2. Door and window frames3. Decorative trim and molding<br />Transportation1. Automotive trim and molding2. Railway and subway components3. Shipbuilding components<br />

Gun metal flanges are crucial components in various industrial applications, providing robust connections between pipes or valves. Their durability, corrosion resistance, and reliability make them indispensable in sectors like oil and gas, chemical processing, water treatment, and more.

316Ti Stainless Steel Flange is&nbsp;a Titanium stabilised version of 316 molybdenum-bearing austenitic Stainless Steel. The 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as 304.

Grade 202 is chromium-manganese-nickel stainless steel with high toughness at low temperature. In comparison, grade 202 has less nickel content unlike 304. Hence it offers low corrosion resistance and lower toughness. But it is a less expensive substitution for grade 304 in many applications. Chemical Composition.

The 316 Stainless Steel 90 degree Elbow is the commonly used of elbows. The 316 material is cost effective and therefore it is the most commonly used stainless steel material in the world. There are seamless, welded and fabricated fittings. The pressure classes vary from 5s to XXS.

Stainless Steel Weldolet is used in various corrosive and high-temperature applications:
1. Chemical processing: Used in chemical processing plants, particularly in equipment and piping systems exposed to corrosive substances and high temperatures.2. Petrochemical industry: Used in the petrochemical industry, particularly in equipment and piping systems.3. Power generation: Used in power generation plants, particularly in nuclear and fossil fuel applications.4. Marine hardware: Used in marine hardware, such as in boat fittings, propeller shafts, and marine equipment.5. Food and beverage: Used in food and beverage processing plants, particularly in equipment and piping systems.

347H Stainless Steel Rod is used in various high-temperature applications that require excellent corrosion resistance, strength, and durability, including:
Industries and Applications1. Power Generation: Boiler components, superheaters, and heat exchangers.2. Chemical Processing: Equipment for handling corrosive chemicals at high temperatures.3. Oil and Gas Industry: Downhole tubing and casing, wellhead components, and drilling equipment.4. Aerospace Industry: Engine components, exhaust systems, and heat exchangers.5. Heat Treatment Industry: Furnace components, heat exchangers, and piping.

7075 aluminum sheet belongs to Al-Zn-Mg-Cu superduralumin, which is a cold-treated forging alloy with high strength and hardness, far better than soft steel.

Stainless Steel Angle Channel 310 is used in various applications, including:<br />Aerospace and Defense1. Jet engine components (e.g., turbine blades, vanes)2. Gas turbine components3. Rocket components<br />Power Generation1. Nuclear power plant components (e.g., reactor vessels, piping)2. Fossil fuel power plant components (e.g., boiler tubes, heat exchangers)<br />Chemical Processing1. Chemical reactors and vessels2. Piping and tubing systems3. Heat exchangers and condensers<br />Heat Treatment and Furnace Components1. Furnace components (e.g., heating elements, radiant tubes)2. Heat exchangers and recuperators

Aluminium alloy pipe fittings are widely used in various industries, including construction, automotive, and aerospace. These fittings are made from a combination of aluminium and other metals to produce a material that is strong, lightweight, and corrosion-resistant

Aluminium rectangular tubes and pipes are most often used in the construction industry as support posts and frameworks, but are also used as fence posts, barriers and in shopfitting. They can also be used to transport fluids because of their large volume, and are lightweight.

The alloys have medium to high strength and can be age hardened. They are both wrought alloy. Also available as cast alloy. Their susceptibility to corrosion and their poor weldability are disadvantageous. Duralumin is the oldest variety in this group and goes back to Alfred Wilm, who discovered it in 1903.

ASME SA 210 Grade C Carbon Steel Seamless Tubes are&nbsp;Medium Carbon Steel Tubes with max 0.35 % carbon content with combination of 0.29-1.06 % manganese. These Tubes are most commonly used for general purpose applications worldwide.

Mild steel square pipes are widely utilised in building projects because of their exceptional blend of durability and cost-efficiency. These pipes are commonly utilised in the construction of building frameworks, support structures, and various fabrication operations.

Tantalum Rod R05240 is used in various high-performance applications, including:<br />Electronic Components1. Capacitors and resistors2. High-temperature electronic components<br />Chemical Processing1. Corrosion-resistant equipment (e.g., reactors, heat exchangers)2. Handling of aggressive chemicals<br />Medical Equipment1. Implantable devices (e.g., pacemakers, implants)2. Surgical instruments<br />Aerospace Industry1. High-temperature components (e.g., rocket nozzles)2. Corrosion-resistant components<br />

321 stainless steel coil and sheet is part of the&nbsp;austenitic&nbsp;family of stainless steel. 321 is basically&nbsp;a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue.

 Monel® 400 is a Nickel-Copper alloy with high strength and toughness and remains ductile even at subzero temperatures. Age-hardening treatments are not required to obtain the high strength properties of Monel® 400 because it is a solid-solution alloy that is hardened only through cold working.

Alloy steel pipe P91 is high-strength steel with excellent mechanical properties. It has a high tensile strength, excellent hardness, and toughness, making it well-suited for high-temperature and high-pressure applications. P91 is also corrosion-resistant, making it a suitable material for use in harsh environments.

Super Alloy Hastelloy C22 Flanges are weld neck flange highly resistant to corrosion and heat. It has been used for decades, primarily in the chemical process industries. The Hastelloy C22 material is known for its superior performance in environments with frequent exposure to harsh chemicals and liquids.

ASTM A182 F9 flanges are used in various high-temperature and high-pressure applications, including:
Power Generation and Fossil Fuel Plants1. Boiler and turbine components2. Piping systems for steam and gas3. Heat exchangers and condensers
Petrochemical and Refinery Plants1. Process piping systems for high-temperature fluids2. Reactor and vessel components3. Heat exchangers and condensers
Oil and Gas Industry1. Wellhead equipment and drilling rigs2. Pipeline and piping systems for sour gas and crude oil3. Offshore platform equipment
Chemical Processing and Pharmaceutical Plants1. Process piping systems for corrosive chemicals2. Reactor and vessel components3. Heat exchangers and condensers

Monel 400 circle, also known as Alloy 400, is a nickel-copper alloy used in various applications, including:
Marine and Shipbuilding1. Propeller shafts and components2. Pump and valve components3. Marine hardware and fittings
Chemical Processing and Petrochemical1. Chemical reactors and tanks2. Piping systems for corrosive chemicals3. Heat exchangers and condensers
Power Generation and Nuclear1. Nuclear reactors and fuel rods2. Heat exchangers and condensers3. Piping systems for power plants
Oil and Gas Industry1. Offshore platform equipment2. Pipeline and piping systems for sour gas and crude oil3. Wellhead equipment and drilling rigs
Aerospace and Defense1. Aerospace components and fasteners2. Defense equipment and components

मराठी मध्येIn EnglishAluminium alloy 3003 is&nbsp;a medium strength alloy with very good resistance to atmospheric corrosion and very good weldability as well as good cold formability. It has better mechanical properties, especially at elevated temperatures than the 1000 series alloys. Packaging: containers, closures.

Aluminum 5052 is an aluminum alloy with magnesium as the primary alloying element, supplemented with a small chromium addition. It has good formability when in the fully soft, annealed temper and can be work-hardened to fairly high strength levels. It is commonly used in a multitude of engineering applications.

Stainless Steel 310 Tee fittings are widely used in various industries and applications due to their unique properties, such as:<br />Industries and Applications1. Heat Exchangers and Furnaces: In the petrochemical, chemical, and power generation industries.2. Aerospace and Defense: In the manufacture of aircraft and missile components.3. Automotive: In the production of exhaust systems and other high-temperature components.4. Chemical Processing: In chemical plants, processing facilities, and equipment handling corrosive chemicals.5. Power Generation: In nuclear power plants, fossil fuel-based power generation, and renewable energy systems.

Copper is soft and easy to work with, but the material is not soft enough to bend perfectly on its own. Bending copper pipes without specialized tools can result in pipe collapse, meaning the pipe may form uneven edges instead of a smooth curve at the intended bend point.1

The primary function of a ring joint gasket is to provide a tight, secure, and leak-proof seal in applications where conventional gaskets may fail to withstand extreme conditions. The RTJ gasket achieves this by forming a metal-to-metal seal between the flange faces under high compressive loads.

The Inconel Alloy 825 is an austenitic alloy, where nickel, iron, and chromium are the base elements. The alloy also has molybdenum, titanium, and copper in it. The Incoloy 825 Bolts are known for providing extensive resistance to corrosion in oxidizing and reducing environments.

A forged pipe fitting has a high quality as it has higher strength to withstand higher pressure. The wall thickness is thicker than other type of fittings for threading process or machining to socket weld end. The standard of ASME B16.

SS 304 Forged Fittings are used in various applications that require joining two heavy-duty metal parts. Stainless Steel 304 Forged Socket Fittings can be used in shipbuilding, fats and fertilizers, and the chemical industries. In addition to being reliable, it has a high tolerance capacity.

Inconel 718 Hex Bolts are a type of high-strength, corrosion-resistant fastener made from Inconel 718 alloy. Here are some common usage and applications:
1. Aerospace industry: Inconel 718 Hex Bolts are widely used in the aerospace industry, particularly in engine components, such as turbine blades, discs, and shafts.2. Gas turbines: They are used in gas turbines, where they are exposed to high temperatures and corrosive substances.3. Power plants: Inconel 718 Hex Bolts are used in power plants, particularly in high-temperature areas such as boilers and turbines.4. Chemical processing: They are used in chemical processing plants, where they are exposed to corrosive substances and high temperatures.5. Oil and gas industry: Inconel 718 Hex Bolts are used in the oil and gas industry, particularly in offshore platforms, pipelines, and other equipment exposed to seawater and corrosive substances.6. High-temperature equipment: They are used in high-temperature equipment, such as in furnaces, heaters, and heat treatment equipment.

Inconel 600 Hex Bolts are a type of high-temperature, corrosion-resistant fastener made from Inconel 600 alloy. Here are some common usage and applications:
1. Nuclear industry: Inconel 600 Hex Bolts are used in the nuclear industry, particularly in reactors, heat exchangers, and other high-temperature applications.2. Chemical processing: They are used in chemical processing plants, where they are exposed to corrosive substances and high temperatures.3. Petrochemical industry: Inconel 600 Hex Bolts are used in the petrochemical industry, particularly in high-temperature and corrosive environments.4. Heat exchangers: They are used in heat exchangers, where they are exposed to high temperatures and corrosive substances.5. Power plants: Inconel 600 Hex Bolts are used in power plants, particularly in high-temperature areas such as boilers and turbines.6. Aerospace industry: They are used in the aerospace industry, particularly in high-temperature applications such as engine components and heat exchangers.

Inconel 800 Hex Bolts are a type of high-temperature, corrosion-resistant fastener made from Inconel 800 alloy. Here are some common usage and applications:
1. Power plants: Inconel 800 Hex Bolts are used in power plants, particularly in high-temperature areas such as boilers, heat exchangers, and turbines.2. Chemical processing: They are used in chemical processing plants, where they are exposed to corrosive substances and high temperatures.3. Petrochemical industry: Inconel 800 Hex Bolts are used in the petrochemical industry, particularly in high-temperature and corrosive environments.4. Aerospace industry: They are used in the aerospace industry, particularly in high-temperature applications such as engine components and heat exchangers.5. Nuclear industry: Inconel 800 Hex Bolts are used in the nuclear industry, particularly in high-temperature and corrosive environments.6. Heat exchangers: They are used in heat exchangers, where they are exposed to high temperatures and corrosive substances.