Ragnar Metals & Tubes

The SS Circle can be defined as a SS sheet or plate which comes in the circular form. Their chemical composition and physical properties would specifically depend on the grade of SS used for manufacturing it. Their thickness can range between 1mm to 100mm, and these steel circles are used in a wide range of industries.

Stainless Steel Angle Channel 316 is used in various applications, including:<br />Chemical Processing1. Chemical reactors and vessels2. Piping and tubing systems3. Heat exchangers and condensers<br />Marine and Shipbuilding1. Propeller shafts and bearings2. Piping and tubing systems3. Heat exchangers and condensers<br />Oil and Gas1. Downhole components (e.g., tubing, casing)2. Wellhead and Christmas tree components3. Pipeline and piping systems<br />Food and Beverage Industry1. Food processing equipment (e.g., tanks, piping, heat exchangers)2. Brewery and winery equipment

Grade 202 is&nbsp;chromium-manganese-nickel stainless steel with high toughness at low temperature. In comparison, grade 202 has less nickel content unlike 304. Hence it offers low corrosion resistance and lower toughness. But it is a less expensive substitution for grade 304 in many applications

A "201 Stainless Steel Slit Coil" refers to a coil of stainless steel, specifically grade 201, that has been cut into narrower strips (slit) from a wider master coil, making it suitable for various manufacturing applications where smaller widths are needed; this type of steel is known for its good corrosion resistance at room temperature, high tensile strength, and is commonly used in kitchenware, automotive parts, and industrial equipment due to its cost-effective nature compared to higher nickel content stainless steels like 304 or 316, although it can be susceptible to corrosion in chloride environments or when exposed to copper alloys. 

The 304L round bar scomes with improved weldable properties. It can effectively resist sensitization from grain boundary precipitation. This is why they can be used in as-welded condition. However, due to the low carbon content, these round bars come with a lower tensile strength and yield strength

904L Stainless Steel Rods are used in various applications that require excellent corrosion resistance, high strength, and good weldability. Some common uses include:
Industries and Applications1. Chemical Processing: Equipment and components for chemical processing plants, including reactors, heat exchangers, and pipes.2. Oil and Gas: Components for offshore platforms, pipelines, and other equipment in the oil and gas industry.3. Power Generation: Components for power plants, including heat exchangers, condensers, and other equipment.4. Pulp and Paper: Equipment and components for pulp and paper mills, including bleaching equipment and pipes.5. Seawater Applications: Components for seawater desalination plants, offshore platforms, and other equipment exposed to seawater.

304 stainless steel coil is a low carbon, molybdenum bearing, austenitic stainless steel coil. Its chemistry features a minimum of 18% chromium and 8% nickel. These grade stainless steel coils are used for its corrosion resistance to many chemical corrodents, in addition to having good mechanical properties.

The 202 Stainless Steel Coil contains chromium, nickel, manganese, and nitrogen in its chemical composition. This material is known for its high corrosion resistance, hardness, toughness and also the strength. The toughness offered by the UNS S20200 Coil at a low temperature is quite good.

An austenitic grade that can be severely deep-drawn is SS 304 Coil material. SS 304L Plates (UNS S30403) is a T-300 series stainless steel austenitic with a minimum of 18% chromium and 8% nickel. SS 304L Coils are also known as 18/8 stainless due to their chemical composition. SS 304L Circle is essentially nonmagnetic.

EN 9 circle, also known as 070M55 steel, is a popular steel grade used in various applications, including:
Automotive Industry1. Gears and gearboxes2. Axle shafts and crankshafts3. Engine components
Industrial and Mechanical1. Shafts and axles2. Gears and gearboxes3. Machine components
Agricultural Equipment1. Tractor parts and components2. Plows and cultivators3. Harvesting equipment
General Engineering1. Construction equipment2. Pump and compressor components3. Bearing and bushing components

En19 steel is a high quality engineering alloy steel containing chromium and molybdenum. It falls in a class of low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. It can be heat treated in a number of ways to give it a combination of properties.

EN47 circles are commonly used in various applications, including:
Automotive1. Engine components, such as piston rings, cylinder liners, and valve seats2. Gearbox and transmission components, like gear rings and bearing rings
Industrial and Mechanical1. Bearings, bushings, and sleeves2. Gears, sprockets, and chain wheels3. Piston rings and cylinder liners for compressors and pumps
Aerospace1. Aircraft engine components, such as turbine shafts and bearing rings2. Landing gear components
Other Applications1. Construction equipment, like excavator and crane components2. Railway components, including axle shafts and bearing rings3. Textile machinery components, such as loom parts and spinning machinery

Copper flat bars are strips pure copper with a standard length of 4 meters. Copper flat bars are widely used in the conduction and electricity industry. Copper has the highest electrical conductivity of all common metals on Earth.

The general versatility of beryllium copper as an engineering raw material is well known. As a non-sparking and non-magnetic alloy, the thermal and electrical conductivity of the product is excellent. The hardness properties can also be modified; beryllium copper can be hardened or softened during heat treatment.

Titanium Rod Grade 5 (Ti-6Al-4V) is used in various high-performance applications, including:<br />Aerospace Industry1. Aircraft engine components (e.g., compressor blades, discs)2. Airframe components (e.g., fasteners, fittings)<br />Medical Industry1. Implants (e.g., hip replacements, dental implants)2. Surgical instruments<br />Sports Equipment1. High-performance bicycle frames and components2. Golf clubs and other sports equipment<br />Chemical and Petrochemical Industry1. Corrosion-resistant equipment (e.g., pumps, valves)2. Heat exchangers and condensers

Aluminium coil are sheets of flattened aluminium rolled into a coil. It is used in the automotive, aerospace and electronics industry because of its corrosion resistance and ductility. If you are looking to source aluminium coil you first need to know how to determine the quality of the coils.

The alloy's nickel base, in conjunction with substantial chromium content, provides resistance to many corrosive media and high- temperature environments.

Inconel® 718 is a precipitation-hardening nickel-chromium alloy containing significant amounts of iron, columbium, and molybdenum, along with lesser amounts of aluminum and titanium. 718 materials maintain high strength and good ductility up to 1300°F (704°C)

Nickel Alloy 200 Circles are highly durable and versatile products with exceptional weldability, fabricability, and performance in low-temperature environments. ASTM B162 Nickel Alloy 200 Rings are manufactured using innovative machinery to achieve a high surface finish and dimensional accuracy.

Alloy 201 has excellent resistance to many corrosive media from acid to alkaline and is corrosion resistant. Alloy 201 offers good mechanical properties within a wide range of temperatures as well as magnetic and magnetostrictive properties and useful thermal and electrical conductivities.

Cupro Nickel 70/30 circle is a high-quality material widely used in various industrial and commercial applications. It has a composition consisting of 70% copper and 30% nickel, which makes the metal optimal for welding, soldering, and brazing tasks.

It is corrosion resistant, castable, and has a similar coeff. of thermal expansion as that of porcelain. The alloy can be cast centrifugally and has a hardness which lies slightly above that of gold. Used for dentures, bridges and crowns which are coated with porcelain or a synthetic material.

Inconel® 600 is a member of the Inconel family of superalloys. A standard engineering material, this versatile nickel-chromium alloy provides high resistance to corrosion and heat, good oxidation resistance at higher temperatures, and good resistance in carbonizing and chloride-containing environments.

UNS N06600 or W.Nr. 2.4816, Inconel 600, also known as Alloy 600, is a nickel-chromium-iron alloy with good oxidation resistance at high temperatures and resistance to chloride ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion.