Ragnar Metals & Tubes

The 316l Stainless Steel 90 degree Elbow is the commonly used of elbows. The 316l material is cost effective and therefore it is the most commonly used stainless steel material in the world. There are seamless, welded and fabricated fittings. The pressure classes vary from 5s to XXS.

The 304l Stainless Steel 90 degree Elbow is the commonly used of elbows. The 304l material is cost effective and therefore it is the most commonly used stainless steel material in the world. There are seamless, welded and fabricated fittings. The pressure classes vary from 5s to XXS.

The ASTM A403 WP 310 Buttweld Elbow is a fitting that is applied to turn a pipe in a different direction with 45 degrees angle or 90 degrees angle usually.

मराठी मध्येIn EnglishStainless Steel 321 is a basic austenitic 18/8 steel (Grade 304) stabilised by Titanium (321) addition. SS 321 is used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.

The stainless steel 309 elbow is installed between the two pipes, allowing the direction to be changed 180°, 90° or 45°.

201 stainless steel offers moderate heat resistance, handling up to about 500°C (1,112°F). Exceeding this temperature may cause a significant loss of strength and oxidation resistance. Its lower nickel content results in reduced heat resistance compared to grades like 304 and 316

मराठी मध्येIn EnglishIntroducing the Stainless Steel 410 Long Radius ERW Elbow , a high-quality ERW elbow designed to meet the diverse needs of industries in India and beyond. Crafted from premium materials, this elbow ensures durability and resistance to wear and tear.

lloy 904L (UNS N08904) is a superaustenitic stainless steel that is designed for moderate to high corrosion resistance in a wide range of process environments. The combination of high chromium and nickel content, coupled with additions of molybdenum and copper, assure good to excellent corrosion resistance.

Our 317L Stainless Steel Elbow has an austenitic alloy that offers better corrosion-resisting properties and can last for many years to come. The Werkstoff Nr. 1.4438 Concentric Reducer helps in shifting the diameter between the pipes.

EN24T steel elbows are used in various high-strength applications, including:
Aerospace and Defense1. Aircraft and helicopter components2. Engine mounts and brackets3. Structural components for military vehicles
Automotive and Motorsport1. Engine components, such as crankshafts and connecting rods2. Gearbox and transmission components3. Suspension and steering components
Industrial and Mechanical1. Heavy machinery components, such as gears and shafts2. Hydraulic and pneumatic cylinders3. Pump and compressor components

Stainless steel pipe elbow has higher strength and higher corrosion-resistances than carbon steel elbow. For general surface treatment, stainless steel elbow is used in high corrosion environment, such as chemical plants, offshore and gas pipelines.

It is a connector in between nominal bore pipes.Elbow can be made in the mild carbon steels materials. The ms pipe fittings range from ½ inches to 12 inches in nominal bore sizes. T

Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone. It has medium fatigue strength

Stainless Steel 321 Tee fittings are widely used in various industries and applications due to their unique properties, such as:<br />Industries and Applications1. Aerospace: In aircraft and spacecraft applications, including engine components, exhaust systems, and heat exchangers.2. Chemical Processing: In chemical plants, processing facilities, and equipment handling corrosive chemicals.3. Power Generation: In nuclear power plants, fossil fuel-based power generation, and renewable energy systems.4. Oil and Gas: In offshore platforms, pipelines, and equipment handling corrosive fluids.5. Food Processing: In food processing equipment, including heat exchangers, mixers, and conveyors.

Hastelloy® c-2000 is nickel-chromium-iron alloy with addition of molybdenum and copper. The alloy has excellent corrosion resistance to oxidizing chemicals and atmospheres while offering resistance to reducing chemical resulting from the nickel and copper content.

SMO 254 Pipe Fittings are resistant to bromides, fluorides and chlorides. They have high ductility and high strength. These are made up of a high end chromium nickel austenitic stainless steel. The minimum tensile strength is 680MPa and the minimum yield strength is 300MPa.

Monel 502 elbows are used in various applications, including:
Chemical Processing and Pharmaceutical Industries1. Chemical reactors, heat exchangers, and piping systems2. Equipment for handling corrosive chemicals
Marine and Offshore Industries1. Marine hardware, such as propeller shafts, fittings, and fasteners2. Offshore platform components, including piping, tubing, and heat exchangers
Aerospace and Defense1. Aerospace components, such as engine components, fasteners, and fittings2. Defense applications, including marine hardware and ordnance components
Power Generation and Desalination Plants1. Heat exchangers, condensers, and piping systems2. Components for flue gas desulfurization (FGD) systems

A tee fitting is a connector that can be used in the middle of two pipes to allow them to join together. It allows for fluid, gas or power flow. The term "tee" comes from its shape - it looks like an upper case letter 'T'. A T-fitting will have three openings; one on each side and one in the middle.

Alloy Steel Elbowlet is a type of pipe fitting used in various industries for branching off from a main pipe line at a 90-degree angle.
Key Applications1. Petrochemical industry: Alloy Steel Elbowlet is used in petrochemical plants for piping systems that handle high-pressure and high-temperature fluids.2. Power generation: It is used in power plants for piping systems that require high-strength and durability.3. Oil and gas industry: Alloy Steel Elbowlet is used in oil and gas exploration, production, and processing facilities.4. Chemical processing: It is used in chemical processing plants for handling corrosive and high-temperature chemicals.
Advantages1. High strength: Alloy Steel Elbowlet offers high strength and durability, making it suitable for high-pressure applications.2. Resistance to corrosion: It can be coated or treated to resist corrosion, increasing its lifespan.3. Versatility: Alloy Steel Elbowlet can be used in various piping systems and applications.
Industries1. Petrochemical and chemical processing2. Power generation3. Oil and gas4. Industrial manufacturing
Alloy Steel Elbowlet is a critical component in various industries where high-strength and durable piping systems are required.

316/316L stainless steel circles are austenitic stainless steel alloys containing chromium, nickel, and molybdenum. The composition typically includes: Chromium: 16-18% Nickel: 10-14%

Stainless steel type 1.4305 is popularly known as grade 303 stainless steel. Grade 303 is the most readily machinable of all the austenitic grades of stainless steel. The machinable nature of grade 303 is due to the presence of Sulphur in the steel composition.